Home > News > News center > Shutters how to clean and listen to voice
News
News center
Contact Us
Heze Huasheng Wooden Products Co., Ltd
TEL:+86-530-6219566
FAX:+86-530-6219565
E-mail:admin@huashengindustry.com
Address:No.8, Industrial Park, Zhuangzhai Town, Heze, Shandong Contact Now

News center

Shutters how to clean and listen to voice

2018-06-07 14:58:34


Shutters, a good home partner, wild, functional, can make difficult to use the light freely, then how do we in life, how to clean and maintain shutters?

Method: 

Blinds can usually be wiped with a wet cotton cloth and thoroughly cleaned once a month with a detergent. A little detergent can be used to wipe the leaves in one direction.

Because of the material and painting, blinds are easier to fade, so be careful not to expose them.

1. Wear rubber gloves and then wear cotton gloves. Then dip your hands into a dilute solution of household cleaners and wring out the hands.

2. Fingers are inserted into the fully opened shutter blades and the fingers are forced to slide, so that the dirt on the blades can be easily removed.

3. If the cotton gloves are dirty, put your hands in the cleaning liquid and rub it to clean the gloves.



Steps:

1. Using tools: clips

2. Prepare a spray bottle, pour 2 scoops of baking soda and half a glass of water into the bottle and shake it evenly;

3. Then put two rags on the bottom of the clip, then spray the spray on the rag to keep it moist without dripping, and then you can use it to wipe the blinds.

4. This method will not be afraid of dirty hands, and it is also very convenient to clean.

Solid wood blinds cleaning method. First close the blade, place the blade on a flat surface and dust it to remove dust from the surface. After the operation, rotate the blade to the other side and remove the dust first. Then open the blade, put a clean old sock, or glove. , Wet, put in the hand, hold each blade, from left to right, wipe it again, both sides of the blade are wiped clean at the same time.

It should be noted that solid wood materials should be prevented from being soaked in water, otherwise they will be deformed and cracked.

Water-resistant material shutter cleaning method. Such as metal or hard plastic material shutters, such as aluminum alloy blinds(oem color Wooden Shutter in china) - can be blinds directly from the card slot unloading, into the bathtub, soaked in soapy water or detergent powder, rinse with water, need to Brush the dirt with a brush. Finally, wipe it back with a cloth and dry it with natural ventilation.

White vinegar. Mix white vinegar and water in a container according to the ratio of 1:2. After wiping the blinds with old socks, it is not only simple and clean but also very effective.

Purchase tools. Now we can buy such tools in many places, and it will do more with less. If the blinds in the house are hung on the balcony or in the living room and friends of the room, then the biggest enemy to the blinds is dust, so the easiest way is to use a feather duster to remove the dust on a regular basis.