One-Stop Purchasing for Shutters and Blinds
Heze Huasheng Wooden Co., Ltd


Home > News > News > What are some of the shutter t.....
Browse Categories
Wooden shutter(76)
PVC Shutters(25)
Aluminum Shutter(57)
Shutter Components and Accessories(29)
Wooden Blinds(109)
Blinds Components and Accessories(33)
Certifications
PVC/wood shutter components and Accessories

News

What are some of the shutter tips, you know?

  • Author:Heze Huasheng
  • Source:Heze Huasheng
  • Release on :2017-06-26
A shutter is a style of a window that originated in China. China antique buildings, with two lancet windows, are used from the warlike states period to Han Dynasty dynasties. Said the two lancet windows straight, and strip, called Horizontal windows. Horizontal window is a primitive style of blinds, you can also say that it is the original state of the shutter.


Size folds

The shutter assembly has two installation procedures: Dark and bright. The size of the shutter ()High quality wood Blinds() should be measured according to different methods of the assembly. The shutters, which are concealed on the window grille, should be its length the same height and width as the windows, but the windows around the narrow 1 ~ 2 cm. 


If the blinds are hung outside the window, the length should be about 10 centimeters longer than the height of the window, and the width is about 5 inches wider than the window ()Custom color wooden shutter in China() pages to make sure it has a good shadow effect. In general, kitchen, toilets and other small room for hidden blinds, venetian blinds and the living room, bedroom and study room is better suited to use it.



Wrinkle Look Quality

The shutter blade is an important part of the shutter. When buying blinds it is better to have a touch of the clasp to see if the sheets are smooth and even, to see if each of the blades has a rough edge.

Generally, the quality of the shutter ()High quality wood blind supplier) in the details of the blade to deal with better, especially plastic, wood block, bamboo leaves from Venetian blade, if the texture is good, then its lifespan will be longer.
The Regulation bar is also a part of the shutter that needs to be tested.



The lever of the shutter has two functions, one is to set the shutter, and the other is to adjust the angle of the blade. When checking the setting lever, first, the shutter is hung flat to test whether the lifting switch is smooth or not, then turn the lever to see if the rotation of the blade is equally flexible.